New Spida Rolsplicer splices 2″ x 3″, 2″ x 4″ and 2″ x 6″ lumber with a 3 to 4 second cycle time. Presses the lumber together in compression prior to imbedding plates. Embeds plate lengths up to 19 inches. Features two recessed, simultaneous-activation buttons, guarded motor and sprockets, external lubrication points, 3 HP motor and a footprint of 59″ long x 42″ wide. Standard R to L or optional L to R outfeed at no additional cost. Optional 20′ infeed and 10′ outfeed conveyor available. 480 volt, 3 phase electrical. Most other voltages available. 90 PSI at 0.25 CFM air required.