2020 Randek model SPL 728 automated upcut saw with 26 foot length stop and only approximately 30 hours of run time on the saw. Cuts up to 26 foot long x 5 inch thick lumber, with depths up to 16 inches. Features bevel and compound cutting, 0 to 360 degree cuts, 10 HP motor with 28 inch diameter blade and large capacity for timber or truss/wall panel cutting. Fully automated or manual set up. Printer available through OEM at an additional cost. 480 volt, 3 phase electrical power required. 102 PSI at 18 CFM air required. See PDF brochure and video links below.