2019 Panels Plus Wall Framing Machine Model 55020-1 – This machine is designed to frame wall panels made from 2×4 to 2×10, dimensional and engineered lumber. The walk-through squaring table consists of a stationary and moveable section. The moveable section is guided by the tracks on the floor. The table can be opened or closes to set the wall height, or clamp and unclamp the wall by simply stepping on the footswitch on the load end of the table or pressing the open or close buttons located on the exit end of the table. No tool dollies or stud-locators.
General Specifications:
Machine Length 22’-0”
Machine Width 16’-8”
Machine Height 6’-4”
Table Height 33”
Wall Length .up to 16’-0
Wall Height 4’-0” – 12’-4”
Electrical 120Vac/60Hz/15amp
Air 30 CFM @ 90-120psig
2019 Panels Plus Squaring Table Model PP55015 – This machine is designed to square wall panels made from 2×4 to 2×10, dimensional and engineered lumber. walk through open table design consisting of a stationary and moveable section. The moveable section traverses in and out on v-tracks mounted on the floor. The table can be opened or closed to set the wall height, or clamp and unclamp the wall by simply stepping on a footswitch located on the load end of the table or pressing the open or close buttons located on the exit end of the table.
General Specifications:Machine Length 20’-0”
Machine Width 20’-6”
Machine Height 8’-4”
Table Height 33”
Wall Length up to 16’-0
Wall Height 4’-0” – 12’-4”
Electrical 120Vac/60Hz/15amp
